We take great pride in our customer support and part of that is showing you how to get the best out of your bike and its new set-up. Take the time to read our Off-road Suspension Set-up Guide HERE so that you too can get the most out of your riding time.

Want to work on your own suspension? All our tools are professional quality, designed for long life and accuracy. You can save time and get scratch and dent free professional results from the tools available HERE.

Or, if you're not sure which size tools will fit your bike's suspension, why not look it up HERE.

Not only do we do the best suspension in the country, but we can come to your home or your track of choice to do it! Our trackside tuning day involves everything that we can do between 6am and 6pm to help you get a better ride and faster times. Our invaluable knowledge and personalised expertise will get you the edge on your competition. Call us for availability and numbers.

Want a cheap fix to lowering that does not involve a full suspension rebuild and set-up? Lowering links are your simple solution to lower the rear 25mm, 50mm and 75mm with simple bolt in links. While they do not give you the benefits of a full set up, they are a cost effective solution to help you get your bike to a more comfortable level. Available soon.

Our licensed workshop is equipped to carry out any suspension servicing and modifications. Our fully trained and qualified technicians will look after your suspension as if it’s their own. We can rebuild sealed unit shock absorbers usually for a fraction of the cost of replacement, our in house machining centre makes light work of custom parts for special jobs. We also have an engine and general service department, so while your motorcycle is here for suspension work we can carry out service work such as brake pads, valve adjustments and top end rebuilds.

We started out trying to change the specification of the standard internals (re-valving) many years ago, but you get a limited result if the original piston and valve design is a compromised design for reasons of cost and mass production. So a few years ago we started to look at other designs from some of the factory Forks and Shocks we see, and the "no compromise" approach, and began designing parts for stock suspension that overcame the cheap designs and quality control problems. We are able to use different internal parts for different applications and rider types, and that’s where we have been able to make huge impacts on a rider's feel, confidence and speed. We do all the CAD design in house and use our sponsored riders to test the products. Then we test the products on our shock dyno and make sure we are getting the right results. A lot of our customers complain about the harsh feeling they get from stock forks and the resulting arm pump. That is one of the main areas the kits address. We are always looking to lessen rider fatigue and increase mechanical grip.


Find out which kits fit your bike

Check out our Fork T-Valves

Check out our Shock T-Valves

Teknik Fork and Shock Springs are proven winners, and are tougher, more durable, more reliable & more responsive than standard fork or shock springs. Our springs can cope with anything your bike can dish out, which we back with our Lifetime Warranty. Not only that, but we carry Australia's largest range of both fork and shock springs, so we definately have an affordable spring waiting for your bike.


Find the right spring for you and your bike

See our range of Fork Springs

See our range of Shock Springs

If you want to work on your own suspension, or are looking for a complete catalogue (at affordable prices) to supply your workshop, Teknik offers everything you need to build a complete set of forks or shocks. We have a huge range of bushes, seals, wipers, bladders, caps, bump stops, pistons, seal heads, spring seats, and of course springs, valves, washers, shims, and anything else you can think of too.


Find out which parts fit your bike

See our range of Fork Parts

See our range of Shock Parts